Manual
FANTOM 850 PS
18
│
33
3.3.
HYDRAULICS CONTROL PANEL
On the tow bar, there is a control panel with up to 4 levers (according to machine equipment,
the number of levers may vary).
By moving the levers, spherical valves in hydraulic circuits are switched or closed.
The lever positions according to the pictograms drawn determine the specific settings of the
hydraulic circuits for the required machine function.
For better orientation, individual levers are also framed with colour according to the hydr.
circuits controlled by the lever in question.
With open closing valves, it is necessary to pay increased attention, unexpected machine
movement may occur.
When the machine rides on roads, it is necessary to have the machine locking lever for
transport in the LEFT position, i.e. locked.
Machine locking lever for transport
Left lever position
The machine is brought into the transport
condition. The axle (yellow) and folding (red)
circuits are locked.
Right lever position
The machine is brought into the working condition.
The axle (yellow) and folding (red) circuits are open
and allow for free piston rod movement.
Attention! Unexpected machine movement
may occur upon switching.
Folding circuit function switching lever (red circuit)
Left lever position
The red circuit controls the side frame
folding.;
;
Right lever position
The red circuit controls the securing of the
side frames against unfolding.
