JL 351P
22
A
B
C
ADJUSTING THE ROLLER CHAIN
TIGHTNESS
Roller chains tightness adjustment is carried out
E\PRYLQJWKHFKDLQWLJKWHQHU6HH¿J
Loosen the two bolts holding the chain tightener
(11/16” or 17 mm wrench).
Adjust the chain tightness by moving the chain
tightener towards or away from center.
Tighten the nuts.
Check that the chain tightener runs on the
rollers.
NOTE! Do not over tighten the chain.
)LJ7LJKWHQLQJWKHUROOHUFKDLQ
ADJUSTING THE DRUM BRAKE
Adjust the drum brake so that it slows down the
drum slightly while pulling out the rope. This will
reduce risk of tangling and backlash.
To increase the braking effect tighten the
DGMXVWPHQWEROW6HH¿J7RGHFUHDVHWKH
braking effect loosen the adjustment bolt.
)LJ'UXPEUDNHDGMXVWPHQW
1.
2.
3.
4.
•
REMOVING THE WINCH MECHANISM
The whole winch mechanism can be removed in
one piece from the frame. To remove the winch
mechanism from the winch (e.g. in order to chan-
ge the roller chain) follow the instructions below:
Park the winch on a level, stable ground so that
it leans a little backwards.
Remove the cable.
5HPRYHWKHIDVWHQLQJEROWV¿JSRV%EHVL
-
de the drive shaft. Socket size 24 mm (15/16”).
5HPRYHWKHWZREROWV¿JSRV$DWWKHXS
-
per edge of the cover plate. Socket size 24 mm
(15/16”).
5HPRYHWKHGUXPD[OHQXW¿JSRV&DQG
the washer. Socket size 36 mm (1 7/16”)
Pull out the winch mechanism. Weight 148 lbs
(67 kg).
)LJ5HPRYLQJWKHZLQFKPHFKDQLVP
1.
2.
3.
4.
5.
6.
Tighten
Loosen
Friction piece
Drum brake adjustment bolt
Lock nut
Summary of Contents for JL 351P
