CONTROLLER
RIGHT
LEFT
Electro valve
left movement
Battery -
B
PWR
2. Installation
The ECU Dataseed harness is composed by the following cables:
●
CONTROLLER
: To be connected to “Controller” port of G7 Dataseed
●
RIGHT: To be connected to the hydraulic electro valve, right movement
●
LEFT: To be connected to the hydraulic electro valve, left movement
●
PWR: power supply
●
EV3: not used
●
EV4: not used
NOTE:
Use a 1/4 inch nut driver to fix the main cable harness connector to the ECU Dataseed.
1. Technical Specifications
●
Dimensions: 130x90x40mm
●
Weight: 500g (without main harness)
●
Waterproof: IP67
●
Supply voltage: 10-35 Vdc
●
Operative temperature range: -20°C / +60°C
●
Storage temperature range: -30°C / +80°C
●
Power consumption: 14A max @ 12Vdc (~ 170 W)
●
I/O Connections: 1 x RS232 serial port, 4 x PWM
Electro valve
right movement
