FarmTek 110486 Manual Download

Page: 4 / 7

Revision date: 08.15.12

CARTS AND WAGONS

Parts List and Tools Required

ATTACH UNDERCARRIAGE TO

THE CART BED

5/16" x 2-1/4"

Bolts (4)

5/16" Flat Washers (4)

5/16" Locknuts (4)

Complete the following steps to attach the

undercarriage to the cart bed.

NOTE:

Position the cart bed so you can access all

sides.
1. With assistance, lift and place the

undercarriage onto the cart bed. Insert one

5/16" x 2-1/4" bolt through the cart bed

support and undercarriage.

NOTE:

If mounting holes are slightly

misaligned, use a drill and a 3/8" bit to enlarge

the holes.

2. Slide one flat washer over the bolt.
3. Add one locknut.

Do not tighten at this time.

4. Repeat Steps 1-3 for the remaining three (3)

bolts and tighten all bolts. Bolts should be

snug. To prevent damage to the bolts,

do not

overtighten.

Socket and Ratchet

Wrench

Cart Bed (1)

Add Flat

Washer

Add

Locknut

Tighten all bolts.

Summary of Contents for 110486








Search results

Summary of Contents for 110486

Reviews:

Related manuals for 110486

Brands by name

Popular brands

FarmTek 110486, Manual

Search results

Summary of Contents for 110486

Reviews:

Related manuals for 110486

Brands by name

Popular brands