GROWSPAN
™
GOTHIC PRO GREENHOUSES AND SYSTEMS
10
113836_37_38_39 Revision date: 06.06.18
INTERIOR RAFTER ASSEMBLY
Complete the following steps
to assemble interior rafters
.
1. Select pipes for first interior rafter assembly and
position these on ground as shown.
IMPORTANT:
Interior rafters do not use end clamps.
Instead, cross connectors are attached during the
frame assembly.
2. Insert swaged ends of rafter pipes into plain ends and
secure each joint with an FA4482B Tek screw.
NOTE:
For longer frames, it may be easier to assemble
a few rafters at a time and then begin to assemble the
frame.
Position Tek screws so they will not contact
any cover material when frame is assembled.
3. Once rafters are assembled, assemble frame.
RAFTER ASSEMBLY (continued)
(
#20G166SS401D
)
(#166S064)
(
#20G166SS403
)
Space below is reserved for customer notes.
