6
1. GENERAL INFORMATION
1.1. Identification data.
Tractor identification data is located on tractor identification plate, located on the right hand side
on wall of Cabin under the engine bonnet and affixed with rivets, (Fig. 1a).
The plate contains tractor serial number, engine serial number and year of manufacture, etc.
The chassis (tractor) serial number is punctured on the clutch housing at the R.H. side of the
tractor (Fig. 1b).
The engine serial number - punctured on the cylinder block at the R.H. side of tractor, beside FIP
(Fig. 1c).
Cabin identification data - on identification plate on L.H. side front central cross bar of cabin frame
(inside cabin, Fig. 1d).
Fig. 1a
Fig. 1b
Fig. 1c
Fig. 1d
1.2. Safety precautions.
A careful operator is the best operator. Most accidents can be avoided by observing certain
precautions to prevent the possibility of injury or damage. The following precautions should be taken
to help prevent accidents. Read these carefully before operating your new Farmtrac tractor.
!
Important !
1. Read this Manual carefully and familiarize yourself with all the controls before
attempting to operate the tractor. Working with unfamiliar equipment or lack of
operating knowledge may lead to accidents.
2. Do not permit any one to ride on the tractor with the operator.
3. Use the foot steps and assist handles when getting on or off the tractor. It is
recommended that you face the tractor when mounting or dismounting. Keep
steps and platform clear of mud and debris.
4.
Replace any warning sign on the tractor that becomes damaged or is painted
over. Replace all missing, illegible or damaged safety decals.
