ZEB Horizon ZEB Cam Firefly 8SE reset
Overview
This article explains how to reset the ZEB Cam for ZEB Horizon - Firefly model 8SE.
Note: Please check your camera model first to make sure you are following the correct procedure.
Procedure
1. Remove the camera from the scan head by unscrewing the 4 retaining screws using T20 Torx screwdriver.
https://knowledge.faro.com/Hardware/GeoSlam/ZEB_Accessories/ZEB_Horizon_ZEB_Cam_Firefly_8SE_reset
Updated: Fri, 29 Dec 2023 19:24:15 GMT
1