LED state
Scanner state
Orange
An error or warning has occurred
Orange flashing quickly
Low battery or error during boot or shutdown
Red flashing
Scan operation with laser on
Removing the status indicator
Remove the status indicator before placing the laser scanner in its case.
1. Switch off the scanner.
2. Remove the status indicator by grasping it with two fingers on the corners shown in
pulling vertically.
Figure 2-4 : Pull here to remove
Figure 2-5 : Do not pull here
3. Replace the accessory bay cover after removing the status indicator.
4. Store the status indicator in a cloth bag or other soft carrying case that will prevent the gold-plated
contacts from being scratched.
FARO
®
FOCUS® Laser Scanner Accessories Manual
Chapter 2: Status Indicator
FARO FOCUS® LASER SCANNER (00.00)
Page 11 of 36
