background image

circumstances, +50° can only be achieved if the target is placed on the ceiling.

• Distribute the target sheets uniformly over the specified range. At least one board must be close to the horizon (0°).

• The distance between the target sheets and the scanner must be between 1.5 m to 3 m.

• All target sheets must be vertically aligned.

Laser Scanner Placement

• Mount the laser scanner on a tripod.

• Place tripod and scanner on stable, flat surface. The tripod must not move during scanning.

• Keep the distance between the target sheet and the scanner between 1.5m to 3m.

• Adjust the tripod to keep the scanner horizontal.

• Either 0° or 180 ° directions can be used for the horizontal rotation direction toward the target.

Site location example:

- Distance between target and scanner: 1.7m
- Scanner installation height: 1.12m
- Target top height: 2.2m

Scan & Compensate

Compensate with SCENE according to the

user's manual

and execute scanning and correction. When the

Compensation is completed, " Compensation report" is displayed together with the Compensation result.

• Select whether you want to apply the compensation data to the scanner.

• Click disconnect to disconnect from scanner and finish the On-Site compensation.

https://knowledge.faro.com/Hardware/3D_Scanners/Focus/On-Site_Compensation_Instructions_for_the_Focus_S_Series

Updated: Fri, 04 Sep 2020 19:09:50 GMT

5

Summary of Contents for Focus S 70









Reviews: