Media, iframe, embed and object tags are not supported inside of a PDF.
Overview
Without the right
firmware
installed on your computer, your FARO scanner might not work correctly. When FARO
releases new firmware or FARO
®
SCENE software
you may have to upgrade the firmware installed on your computer
and scanner. The firmware latest version is compatible with any model of the supported hardware and software
listed
here
.
WARNING: Downloading firmware from a source other than explicitly provided by FARO may void your warranty and
cause damage to your scanner.
Prepare
Please review this table before you begin to ensure your success.
Time to Complete
This procedure may take up to 60 minutes and must not be interrupted or the upgrade may
not work..
Skills Needed
• Knowledge of Windows at the operating system level
• General computer skills
Prerequisites
• Internet connection
• Computer you use with the scanner
• SD card you use with the scanner
• Storage media for saving files, such as a flash drive
Supported
Hardware
FARO
®
Laser Scanner Focus
3D
X30/130/330
FARO
®
Laser Scanner Focus
3D
X130/330 HDR
Supported
Software
For the Focus
3D
X 30/130/330, SCENE 5.0 and later
For the Focus
3D
X130/330 HDR, SCENE 6.0 and later
Back to top
Unzip the Firmware File
1. After you have
download
the latest firmware, write down the number that appears after
Rev
in the .zip file name
(x.x.x.
xxxxx
).
https://knowledge.faro.com/Hardware/Laser_Scanner/Focus/Firmware_and_Installation_Instructions_for_the_Focus3D_X_30-130-330
Updated: Thu, 23 Mar 2017 05:05:58 GMT
2
