En
FARO Laser Scanner Photon – User’s Manual
41 / 87
Fig.45 Setup menu
The following steps have to be done each time before scanning:
•
Select an appropriate white balance temperature. Auto white balance
is
not
recommended, as your panoramic environment probably
contains a lot of different light sources which would cause a different
white balance on each picture.
Make some test images to check the white balance setting.
Fig.46 White balancing
•
Turn the camera off and connect the USB cable to the camera.
Fig.47 USB cable
Now prepare the scanner and hook up the camera:
•
Put the camera mount on the
mirror module
of the scanner.
