En
FARO Laser Scanner Photon – User’s Manual
49 / 87
Fig.56 Operating position of the camera
Please make sure that the center column is at its same horizontal end
position as before.
•
After having moved the camera into its operating position you can
continue by pressing the
OK
button in SCENE Record (If you started
the scan with SCENE Record), the
Continue
button in SCENE Record
Mobile (if you started the color scan with SCENE Record Mobile) or the
START/STOP
button on the scanner (if you started the color scan
with this button).
•
The scanner will then turn backwards and will stop several times to
take a picture on each stop.
•
The pictures are automatically transferred to the controlling computer
and put into the scan file.
•
After scanning in color the scanner may need some calculating time
before you can go on.
•
Please note: In SCENE you will not be able to apply the pictures to the
scan when you turn off the laser sensor with the key switch before the
scanner has finished taking all pictures.
