En
FARO Laser Scanner Photon – User’s Manual
71 / 87
By clicking on delete link you will be asked to confirm the deletion of this
scan.
8.3
Viewing scans
There are two possibilities to open and see a scan’s image.
•
By clicking on scan’s name shown as
Last Scan
on the
Scan
page just
after the scan was recorded, or
•
By clicking on scan’s name on the
Scans
page as described in section
Other links at the bottom are:
•
Fit Height
: This will resize scan image so that the height is fit to the
screen.
•
Fit Width
: This will fit the width of scan image to the screen, so you
can see whole scan at once.
•
Full Size
: This will display the whole scan image without special
screen fitting. The navigation links are not displayed in this mode to
maximize viewing area. To get back from this mode use the
Back
button of your web browser. The back button of Opera is the green
arrow in the left top corner.
Fig.92 Viewing a scan in
Fit Width
mode
Fig.93 Regular scan image (in
Fit Height
mode)
