En
FARO Laser Scanner Photon – User’s Manual
24 / 87
6.3
The scan bar
Fig.23 Scan bar
Start Scan
: Starts a new scan, if a connection to the scanner has been
established and the scanner is ready.
Start Scan with color
: Starts a color scan if the color option is installed.
The scanner will first take an ordinary scan followed by taking a series of
color pictures with the camera. See chapter 7 for details.
Stop Scan
: Stops the scanner during a scan. There might be a short
delay till the scanner stops scanning.
Scanner Parameter
: Adjustment of scanner parameters and display of
scanner information.
Settings
: Opens a dialog box for visualization and memory parameters.
Select Scanner
: Opens a dialog box for setting the connection with the
scanner.
6.3.1
Scanner Parameter
6.3.1.1
General
The scanner parameter dialog consists of several different tabs, each
covering a different set of parameters or information aspect.
