60
AUT
OCLA
VE SERIE SK07
GUIDE To ProBLEMS
ERRORS DURING
C
yCLES
To r
eset the fault and r
estor
e the system, do as follows:
Simultaneously pr
ess the “ ”, “+” and “-” keys and wait for
the pr
ocedur
e to end.
ER001
Safety Cut Off
safe temperature exceeded in chamber or band
Cont
ac
t
FARO
te
chni
ca
l
support
, st
at
ing
the
da
ta
on
the
autoclave display
.
ER002
T
op-ups
maximum number exceeded of permitted top-ups
Check the load quantity put in the autoclave.
ER003
Pr
essur
e balancing
pressure balancing not reached
Replace the Bio-X filter
.
ER004
No Ready
ready temperature not reached
Contact Faro technical support.
ER005
T
imeout 1
final pressure not reached
Check the load quantity put in the autoclave.
ER006
V
acuum
second vacuum threshold not reached
Check the porthole status and door gasket status.
ER007
T
imeout 2
sterilisation conditions not reached
Che
ck
the
loa
d
quant
ity
put
i
n
the
autoc
lave
and
the
porthole and door gasket status.
ER008
T
chamber
High
chamber temperature over permitted limit
Check chamber probe position.
ER009
T
chamber
Low
chamber temperature under permitted limit
Check chamber probe position.
ER010
High Pr
essur
e
pressure over permitted limit
Contact Faro technical support.
ER01
1
Low Pr
essur
e
pressure under permitted limit
Check the load quantity put in the autoclave.
ER012
T
theor
etic High
theoric temperature over permitted limit
Check the position of the chamber probe. If necessary
,
ER013
T
theor
etic Low
theoric temperature under permitted limit
contact Faro technical support.
ER014
Delta T
emperatur
e
dif
ference between chamber and theoric temperature > +/- 2K
Check the chamber probe position.
ER015
V
acuum T
est:
vacuum
vacuum temperature not reached during vacuum test
Check the porthole and door gasket status
.
ER016
EN 13060
non-compliance with parameters in 300 sec
Check the porthole and door gasket status
.
ER017
EN 13060
non-compliance with parameters in last 600
sec
Check the porthole and door gasket status
.
ER018
EN 13060
non-compliance with temperature limits
Run
V
acuum
T
est on cold machine.
ER019
Door
open
no door closure
Check the door has closed.
ER020
W
ater
Fill. T
imeout
filling tank not filled
Fill the filling tank.
ER021
Empty Discharge
Tank
filling tank not emptied
Empty the dischar
ge tank.
COD.
MESSAGE
DESCRIPTION
ACTION
