Core Agent Installer
|
49
Faronics Core User Guide
Core Agent Installer
The
Core Agent Installer
is used to install the Core Agent on the workstation. The Core Agent is
used to establish communication between the Core Console, Core Server and the Core Database.
This installer must be deployed to the workstations to be managed using Core Console.
Creating a Core Agent Installer
To create the Core Agent installer, complete the following steps:
1. Right-click on the
Core Server
connection node and select
Create Core Agent Installer
.
2. The
Create Core Agent Installer
dialog is displayed with the following options:
—
Event Reporting Connection
— This field displays the server to which the workstation
communicates. This field cannot be edited.
—
Core Server Connection
— This field displays the port on which the Core Agent listens. The
default port is 7751.
—
Wake-on LAN Across Subnets
— Select this check box if the workstation will act as a
Wake-on-LAN (WOL) Relay.
—
Network Traffic Management
— Select the
Max frequency of reports:
in minutes and
seconds.
3. Click
OK
. Browse to select a location for the file.
4. Click
Save
.
Summary of Contents for CORE
