IR REMOTE AND
OSD OPERATION
The DVP1010 is now shipped with a simplified
remote control that allows for direct access to most
commands used to control the processor.
Adjustments can be made three different ways:
1. Press the Menu button to activate the OSD
and use the Function and Value keys to make
changes. Press Menu again to remove OSD.
2. Press the direct access key (Brightness, etc.)
and then adjust using the left/right value keys.
3. Press the direct access key and then enter a
three digit number (i.e. 040 for 40).
Direct Access Commands
for Dual Function Remote Buttons
ON SCREEN DISPLAY (OSD)
Accessing the OSD
•
Press Menu button to bring up main Index.
•
Use Function Up/Down Keys until the triangle
at the top of the OSD turns yellow.
•
Use the Left/Right keys to move to the next
menu page. A list of available Functions
will appear.
•
Press Function Up/Down keys to select
an adjustment.
•
Use Value Left/Right keys to adjust.
The main menu drops away and a single
line menu appears.
•
Use the Function keys to return to the drop
down menu.
•
Press Menu at any time to cancel OSD
Note:
Unused inputs can be deactivated for simpler
operation of the processor. See the Setup
instructions for details.
6
IR REMOTE
INPUT
PICTURE
DISPLAY
PATTERNS
FORMATS
INPUTS
DVD
ASPECT
ANAMORPHIC
PROFILE
RECALL
F 1 2 3 4
STORE
1 2 3 4
Press the Function UP/Down
keys until the triangle turns
Yellow. Press the Value Left/Right
keys to cycle to the Menu tabs.
Use the Value left/Right
keys to change selection
or values.
Select
Inputs
DVD button
not active
Enter
Numbers
Turn unit On/Off
Press to toggle
between pass-
through and
pass-through
transcode
Navigate Menus
Adjust
Picture
FUNCTION
MACRO COMMANDS
Pass-Through
(Pass-T) + (0)
Pass-Through
(Pass-T) + (1)
Transcode
DVI
(DVI) + (0)
RGB
(DVI) + (1)
