6
please close the covers or stay away.” 30 seconds after the
voice prompt is completed, the fans and light are turned on at the
same time: At this time, the working time of the lamp and fans will be
1 hour. When the hour is completed, a voice prompt “Thank
you for your use, please unplug the power plug”. The light and
fans are all turned off.
3. First press the “Power On / Off” button, the red indicator light is on,
and the voice prompt “Welcome to use a microcomputer ultraviolet
germicidal lamp”; then press the “Timer” button three times, the voice
prompt is “Timed 2 hours”, blue, green and red indicator lights
flashing at the same time: Press the “Power On / Off” key again,
and the voice prompt “UV disinfection and sterilization function
is enabled, automatically turn on after 30 seconds, please close the
covers or stay away”. After the voice prompt is completed,the fans
and the light are turned on at the same time. At this time, the
working time of the lamp and fans will be 2 hours. When the 2 hours
are completed, the voice prompt “Thank you for your use, please
unplug the power plug”. The lamp and fan are all turned off.
4. Press the “Timer” button four times in succession, the timer function
is canceled, and the voice prompt “Timer Cancel” is displayed. This
UV germicidal light returns to standby status. The fans will turn on
or off when you hear the voice prompts “fan on” and “fan off”.
REMOTE CONTROL:
1. The operation of the remote is the same as the controls on
the panel.
2. The operation of the “Fan” button is the same as the panel control.
3. How to use the “open” button: When the “Power On/Off” button is
turned on (the red indicator light is on), press the ”Open” button
once, and a voice prompt will state that the unit sterilization
function will automatically turn on after 30 seconds. This
operates the same as pressing the On/Off button on the panel the
second time. Please close the hood and exit the room.
