Model ULC Series
06012021ULC,Rev i
Page 4 of 54
Read This Instruction Manual
Failure to read, understand and follow the instructions in this manual may result in damage to the unit, injury
to operating personnel, and poor equipment performance.
CAUTION! All internal adjustments and maintenance must be performed by qualified service
personnel.
When plugged in, there is high voltage present on terminals inside the machine space. Proper care
must be taken if the electrical control panels are opened to perform any kind of maintenance.
The material in this manual is for information purposes only. The contents and the product it describes are
subject to change without notice. Farrar Scientific makes no representations or warranties with respect to this
manual. In no event shall Farrar Scientific be held liable for any damages, direct or incidental, arising out of
or related to the use of this manual.
Important operating and/or maintenance instructions. Read the accompanying text carefully.
Equipment being maintained or serviced must be turned off and locked off to prevent possible injury
Always dissipate high or low temperatures, especially inside of the control space
before performing any maintenance on the unit.
Always use the proper protective equipment (clothing, gloves, goggles, etc.)
Always dissipate extreme cold or heat and wear protective clothing.
Always follow good hygiene practices.
Each individual is responsible for his or her own safety.
For any questions or concerns, please contact the manufacturer:
Farrar Scientific, Inc.
30765 State Route 7
Marietta, Ohio, USA 45750
Phone: (740) 374-8300