480 Budget - Issue 00
19
10 ADJUSTMENTS
10.1 SOLENOIDS
Once credit has been established and the product has been selected:
1)
The solenoid is energized, withdraws the piston and opens the microswitch A fig.6 releasing the drum.
2)
The motor gearbox rotates the selected drum.
3)
The solenoid is de-energized and enters the first available hole.
4)
The motor gearbox stops.
E
N
G
L
I
S
H
FIG. 6
FIG. 7
10.2 SELECTION
COMPARTMENTS
The selection drums supplied in the vending machine have the compartments set as in fig. 8-9. It may be
necessary to change the compartment sizes to sell different products. The number of compartments is
altered by removing or adding divider blades. The number of spaces for each drum can be: 6, 8, 12, 16, 24,
48 - 5, 10, 20, 40. When the number of dividers is changed it is necessary to adjust the sliding plates on the
righthand drum cover grate fig.7.
It is also necessary to remove or replace the plastic blocking plugs as to the width of the compartment. The
two methods for replacing the dividers are shown here under.
FAS INTERNATIONAL S.p.A. Via Lago di Vico, 60 SCHIO (VI) – tel. +39 0445 502011 – fax +39 0445 502010 - e-mail: info@fas.it
Summary of Contents for 480 BUDGET
Page 1: ...480 BUDGET Issue 00 03 2004 Cod 22056301...
Page 2: ......
