24
480 Budget - Issue 00
10.5 FLUORESCENT LAMP DISASSEMBLY INSTRUCTIONS
Door fluorescent lamp:
A)
Switch the main switch off.
B)
Release the fluorescent light unit from its supports.
C)
Cut the wire fastening bands.
D)
Remove the ends of the wiring.
E)
Replace the fluorescent light.
F)
Reassemble by proceeding in reverse order.
E
N
G
L
I
S
H
10.6 DOOR LOCK ADJUSTMENT
To obtain a different pressure of door locking operate on the grub screw placed under
the hole to which the lock bar is hooked (on the left side of the machione).
By turning the grub screw clockwise you obtain a tighter screwing up, by turning
anti.clockwise you loosen the locking.
10.7 ASSEMBLY OF GEARMOTOR GEARS FIG. 14-15
1)
Insert the shim washers in positions 1-2-3 (fig.15).
2)
Insert the stiffened helical gear fig.14 rif. 8 Z=87, considering that the straight cut
pinion must be turned upwards.
3)
Insert the shaft with straight-cut gear fig.14 rif. 7 Z=54.
4)
Insert the helial gear on the side shaft fig.15 rif. 3 Z=46, considering that the straight
cut pinion must be turned downwards.
FIG.
14
FIG.
15
FAS INTERNATIONAL S.p.A. Via Lago di Vico, 60 SCHIO (VI) – tel. +39 0445 502011 – fax +39 0445 502010 - e-mail: info@fas.it
Summary of Contents for 480 BUDGET
Page 1: ...480 BUDGET Issue 00 03 2004 Cod 22056301...
Page 2: ......
