6
PRODUCT
FLOW RATE
The Ultra-Trak dispenses product when pulled. Each revolution of the wheels
activates the pump and dispenses solution.
The amount dispensed is controlled by the timer setting.
Flow rate is usually between 2-5 on the dial, depending on the requirements of
your coating product..
Walk the Ultra-Trak about 25 feet and adjust the flow rate accordingly.
6.0 - PRODUCT FLOW RATE: TIMER SETTING
THE PUMP IS ONLY
ACTIVATED WHEN THE
MACHINE IS PULLED.
PUSHING THE MACHINE DOES
NOT ACTIVATE THE PUMP.
A
B
C
D
10 FEET AHEAD OF
COMPLETING A PASS, TURN
“OFF” THE POWER SWITCH TO
ALLOW FOR DISPENSER LINE
DRAINAGE. ONCE THE UNIT IS
POSITIONED FOR THE NEXT
PASS, TURN “ON” THE POWER
& RESUME WALKING SPEED.
