7
USING THE
ULTRA-TRAK
Begin pulling in a straight line.
Once the initial line is complete, a “wet edge” must be maintained with an
overlap of 3 to 4 inches per pass.
Stay 3 inches away from the edges to avoid finish accumulation at the edges.
Between coats, cover the head assembly with the black Velcro vinyl bag in to
protect the manifold and pad from drying out.
7.0 - MAIN AREAS
Use the Micro-Trak detail
applicator for edges & corners.
Use on the first and/or last
coat to speed up the process.
7.1 - FOR SMALL AREA
EDGES & CORNERS:
WE RECOMMEND THE
MICRO-TRAK
A
B
C
D
A
B
THE MICRO-TAK
THE STING-RAY
ALTERNATIVELY...
For areas too large for a Micro-Trak, and
too small for convenient use of an Ultra-
Trak, consider the
Sting-Ray
. Its easy
product dispensing and 18” applicator
provides for smooth and even coating of
medium-sized surface areas.
