When using this air tool, the following basic safety precautions should always be followed to reduce the risk to
personal injury:
Always wear safety glasses with side shields in accordance with applicable regulations.
Air powered equipment are capable of propelling materials such as metal chips, saw dust and other debris at
high speed, which could result in serious eye injury. Tool attachments can become loose or break and fly apart
propelling particles at the operator. Compressed air can be hazardous. The air stream can cause injury to soft
Always wear hearing protection in accordance with applicable regulations.
Long term exposure to noise produced from the operation of air tools can lead to permanent hearing loss.
Always wear protective gloves in accordance with applicable regulations.
Use protective mask during the use of the tool in accordance with applicable regulations.
Avoid prolonged and continuous use of the tool.
Prolonged exposure to tool vibrations can cause severe neurological and circulatory disorders.
Never exceed the maximum pressure rating of the tool. The maximum pressure rating of the tool is
reported in the technical specifications (Paragraph 2 of this user manual) and on the same tool.
Exceeding the MAX. pressure rating of tool could cause an explosion resulting in serious injury.
-
Never operate tools near flammable substance such as
-
Work in a clean, well ventilated area free of combustible materials.
-
Never use oxygen, carbon dioxide or other bottled gases as a power source for air tool.
WARNINGS
-
Never carry the tool by the hose. Always hold the tool only from the the ergonomic handle it is endowed
-
Never wear loose fitting clothes, or apparel, which contains loose straps or ties, etc. which could become
entangled in moving parts of the tool. Remove any jewelry, watches, identifications, bracelets, necklaces, etc.
which might become caught by the tool.
-
Remove air hose when tool is not in use and store tool in secure location away in particular from reach of
children.
-
Before removing the compressed air supply hose from the tool, make sure to have previously closed the tap
supply compressed air coming from the supply
-
Remove air hose to lubricate or add attachments and accessories to the tool.
-
Never operate tool while under the influence of drugs or alcohol.
-
overreach. Keep proper footing and balance at all times.
-
Keep handles dry, clean and free from oil and grease.
-
Do not use accessories designed for use without a manual as locking systems.
-
Make sure that any attachments are securely assembled before to use the tool.
-
Do not remove the labels placed on the tool.
3. IMPORTANT SAFETY INSTRUCTIONS
F
G
A
3
09
A
IR
I
M
P
A
C
T
W
R
E
N
C
H
