16
If the tool does not start:
-
Make sure that in the compressed air circuit there is really pressure;
-
Check that all the valves are opened;
-
Check all the connections of the air supply;
-
Check if the safety valves are actived;
-
If the problem persists, the tool need to be repaired from qualified personell.
When the tool is not usable and not repairable, dispose it according to regulations of the place in
order to safeguard the environment.
This product complies with the dispositions of the following European Directives and Harmonized
Standards:
2006/42/EC
Machinery Directive
EN ISO 12100 :2010
EN ISO 11148-9:2012
EN ISO 15744 :2008
EN ISO 28927-12 :2012
This instrument is warranted to be free from defects in materials and workmanship (for a normal
use of service) for a period of one year. Any instrument found detective within one year from the
delivery date and returned to the factory with transportation charges prepaid, will be repaired,
ndable
items such as batteries or fuses. If the defect has been caused by a misuse or abnormal operating
conditions, the repair will be billed to the customer at a nominal cost.
ATTENTION
ALWAYS DISCONNECT AIR SUPPLY BEFORE PERFORMING ANY WORK ON
THE TOOL
6.
TROUBLESHOOTING
7.
DISPOSAL INFORMATIONS
8.
EC DECLARATION OF CONFORMITY
9.
WARRANTY
