2
INTRODUCTION
FASCUT
®
incorporates a rugged alloy cast cutting head with a hydraulic cylinder and two
stage hydraulic pump. By following the enclosed instructions and maintenance schedule,
your
FASCUT
®
machine will provide you with years of trouble free service.
WARNING:
DO NOT
attempt to operate until you have read thoroughly and understand
completely all instructions, rules, etc., contained in this manual. Failure to comply can and
may result in accidents involving fire, electric shock, or serious personal injury. Maintain this
instruction manual and review it frequently for continuing safe operation and instructing new
or possible third-party users.
DO NOT:
TURN ON MACHINE BEFORE REMOVING THE SHIPPING PLUG ON THE TOP
OF THE OIL RESOVOIR AND REPLACING IT WITH THE SUPPLIED BREATHER CAP.
FAILURE TO DO THIS WILL RESULT IN DAMAGE TO THE MACHINE!
ALWAYS:
wear safety glasses when operating.
ALWAYS:
keep fingers away from cutting
blades.
Model FC-800 Portable Cutter -- Specifications
Shear Capacity
1 bar - #8 (1”)
25mm
, #7 (7/8”)
22mm
, or #6 (3/4”)
19mm
Grade 60
(420 MPa)
2 bars - #5 (5/8”)
16mm
3 bars - #4 (1/2”)
13mm
4 bars - #3 (3/8”)
10mm
Shear Method
Open Jaw Shear
Shear Time
Approx. 2 to 4 seconds
Dimensions
26” x 13” x 19”
(L x W x H)
66cm x 33cm x 48cm
Weight
190 pounds /
86kg;
built in carrying handles
Power Supply
Two stage hydraulic pump driven by a one (1) hp. continuous duty
electric motor
Voltage / Amps
110-120 volts @ 15 amps – 50/60 Hz, single phase
220-240 volts @ 7.5 amps – 50/60 Hz, single phase
