Fasep 2000 srl
Rev. 1.2
Balatron 331.G3: User
’s Manual
May 31, 2013
i
F
IG
.
37
: Wheel balancer measures Balatron 331
APPENDIX
A:
Technical Data
Input
100W
Measuring time
98RPM
Control run
4-15 seconds
Accuracy
±1gr (±1/28 ounce)
Wheel dimensions Rim Diameter
from 8" (200mm) to 23" (575mm)
Wheel Diameter
max 34" (850mm)
Rim Width
max 16" (415mm)
Wheel Weight
max 90 Kg (198Lbs)
Wheel balancer dimensions
B331
L (mm)
1040
L1 (mm)
500
L2 (mm)
1240
P (mm)
870
P1 (mm)
200
P2 (mm)
1310
H (mm)
1680
H1 (mm)
1420
Peso (kg)
140
B:
Environmental Data, Safety Features and Requirements
Environmental Data
[
Operating conditions
]
This unit is designed for indoor use only.
Temperature:
0 to 45°C
Relative Humidity:
5 to 80% a 40°
[
Storage conditions
]
Package is designed for indoor storage only.
Temperature:
-25° to 70°C
Relative humidity:
5 at 95% to 40°C
Safety Features
1.
A Safety cover with electrical interlocking (may be optional in some countries) is provided for user
’s safety at the time the wheel
is spun. The installation of the Safety cover is mandatory in the European Countries. This Safety cover is part of the standard
equipment of the wheel balancer in such countries. Drive of the machine may start with closed Safety cover only. If open, the
safety cover interrupts the circuits to the drive motor and prevents automatic starting, even if a defect occurs. Make sure Safety
cover is correctly installed before operating the unit.
2.
The Balance Weights Holder may be removed for servicing. It is secured to the machine body through screws so that only
voluntarily it may be removed. Removal of this protection is therefore restricted to Authorized Service Engineers.
3.
The Control Panel may be removed for servicing. It is secured to the machine body through screws so that only voluntarily it
may be removed. Removal of this protection is therefore restricted to Authorized Service Engineers.
I
WARNING
FASEP 2000 srl shall not be responsible for any inconvenience, breakdown, accidents caused directly
or indirectly by unauthorized service. Service to any parts by unauthorized engineers will void warranty
and will any right of the owner of the unit.
Summary of Contents for B331
Page 35: ......
