SAFETY REGULATIONS
THE EQUIPMENT IS INTENDED FOR PROFESSIONAL USE ONLY.
WARNING :
Only one operator may work on the equipment at a time.
WARNING :
Failure to comply with the instructions and danger warnings may seriously in-
jure operators and any other person present near the machine. Do not operate
the machine until you have read and understood all the danger , warning and
caution notices in this manual.
This machine must be used only by qualified and authorized personnel. A qualified
operator is construed as a person who has read and understood the manufacturer’s in-
structions, is suitably trained, and is conversant with safety and adjustment procedures
to be adhered to during operations. Operators must not use the machine under the in-
fluence of alcohol or drugs which may affect their capacity.
The operator must, in all cases:
1.
Be able to read and understand all the information in this manual.
2.
Have a thorough knowledge of the capabilities of this machine.
3.
Keep unauthorized persons well clear of the area of operation.
4.
Make sure that all machine operators are suitably trained , that they are capable
of using the equipment correctly and that they are supervised adequately.
5.
Make sure the machine has been installed in compliance with all relevant regula-
tions and legislation.
6.
Never leave nuts, bolts, tools or any other equipment on the tyre changer as they
may become entrapped between moving parts.
7.
Do not touch power lines or the inside of electric motors or any other electrical e-
quipment before making sure the power supply has been disconnected.
8.
Read this manual carefully and learn how to use the machine correctly and safely.
9.
Always keep this user and maintenance manual in an easily accessible place and
consult it whenever necessary.
WARNING :
Do not remove or deface the Danger, Warning or Instruction decals. Replace any
missing or illegible decals. If one or more decals have been detached or dama-
ged , replacements can be obtained from your nearest dealer.
1.
When using and servicing the machine, observe the standardized industrial acci-
dent prevention regulations for high voltages.
2.
Any unauthorized alterations or changes made to the machine shall automatically
release the manufacturer from any liability for damage or accidents attributable to
such modifications. Specifically, tampering with or removing the safety devices is a
breach of the regulations for Safety in the workplace.
3.
User must wear personal protective equipment such as gloves, safety footwear
and goggles.
WARNING :
When operating or servicing the equipment, tie back long hair and do not wear
loose-fitting clothes, ties, necklaces, rings or wristwatches which could beco-
me entrapped by moving parts.
8
Summary of Contents for RASE.TOP.2248
