Original notice – User’s manual
24
Tire disassembling
1. Put the tools holder vertically.
2. Move the mandrel holder to the right and then down to align it in front of the
wheel to make it easier to position the wheel.
3. Position the wheel with the hollow base opposed to the mandrel.
4. Open the mandrel and make sure the wheel is locked.
5. Lower the tools holder.
6. Carefully lubricate the tire to protect it from damage and facilitate operations.
7. Bring the rim into contact with the roller of the tools holder.
8. Perform the relief counterclockwise by pressing the left pedal.
WARNING
Always relieve counterclockwise
9. Move the tools holder to the other side of the wheel.
10.
Repeat operation for the other side of the wheel.
WARNING
Grease the heel of the rim generously.
11.
Move the tools holder to the other side of the wheel.
12.
Attach the spout to the tools holder.
13.
Catch the tire rod with the spout approximately 5 mm from the rim.
14.
Slide the tire lifter lever over the spout into the space created.
15.
Turn clockwise until first heel is removed.
16.
Remove the spout.
17.
Place the tools holder on the other side of the wheel.
18.
Move the mandrel holder to the left to push and release the second heel with
the roller.
19.
Turn counterclockwise until complete retraction.
