INSTRUCTION, USE
AND MAINTENANCE MANUAL
GB
Page 41 of 168
• Periodically (every 50 working hours approximately),
carry out the (inner and outer) guides of the tool and
mandrel carriages.
OPERATION TO BE CARRIED OUT ONLY IN
CASE THAT THE TOOL CARRIAGE AND THE
MANDREL CARRIAGE MOVE IN A NON-LINEAR
WAY (TRIGGER ACTION).
C.
Check periodically and, if necessary, adjust the
play of slides (
Fig. 60 ref. 1
) on the guide plates
(
Fig. 60 ref. 2
) by means of the adjustment screws
(
Fig. 60 ref. 3
) of the sliding blocks (
Fig. 60
ref. 4
).
Fig. 60
ANY DAMAGE TO THE MACHINE
DEVICES RESULTING FROM THE
USE OF LUBRICANTS OTHER
THAN THOSE RECOMMENDED
IN THIS MANUAL WILL RELEASE
THE MANUFACTURER FROM ANY
LIABILITY!!
ANY EXTRAORDINARY MAINTE-
NANCE OPERATION MUST ONLY
BE CARRIED OUT BY PROFESSIO-
NALLY QUALIFIED STAFF.
7522-M001-14_P
GG40256.11SL - GG40256.11ST - GG40256.15
GG40256T.15 - GG40256A.15 - GG40256D.15
GG40256TD.15 - GG40256.15SL - GG60360.15
GG60360T.15 - GG60360A.15 - GG60360D.15 - GG60360TD.15