OPERATING AND MAINTENANCE MANUAL
RASE.TOP.4028
Code DOC.
UM TOP AUTOMATIC
4.0
Rev. 6
Page 40 of 86
40
5 – OPERATING THE MACHINE
5.1 – INTENDED USE
The
“
RASE.TOP.4028
”
tyre changer is an automatic machine used to remove/fit tyres having the
following characteristics (ref. table 2.3):
type of tyre: conventional, low profile, run flat.
rim diameter: 1 ” ÷ ”
max tyre width: 80 mm (1 ”).
The
“
RASE.TOP.4028
”
tyre changer and its components must never be used for purposes other
than its intended use.
Complete compliance with the use, repair and maintenance conditions as specified by the
Manufacturer are essential elements falling within the intended use.
The machine must ONLY be used by qualified personnel who have read the
contents of this manual.
Only use materials and products indicated by the Manufacturer to operate the
machine (see section 6.3).
Before beginning operation, ensure there are no tools or foreign objects on the
work surface of the equipment.
Do not operate the machine if it is not stable on the surface on which it is
installed.
5.2 – INAPPROPRIATE USE
The tyre changer must
NOT
be used:
For uses other than those indicated in section 5.1.
In ambient conditions other than those indicated in section 4.1.
For materials and with fluids other than those indicated for the intended use (wheels as
per specifications and hydraulic oils).
Never operate in a potentially explosive atmosphere.
