Fasep 2000 srl
Rev. 1.8
Videotronic V548.G4.U: User’s Manual
11 March 2022
14
Fig. 56
Fig. 57
7.3
Input of Rim Dimensions (ALU-SE)
MAIN MENU > INPUT > ALU MODE
Press
ALU MODE
untill the required position of weight is on the video (fig.56).
Insert the distance (IN1).
Insert the distance (IN2).
Press
ALU MODE
untill the required position of weight is on the video (fig.57).
Insert the distance (IN1).
Insert the distance (IN2).
7.4
Detecting and correcting umbalance
7.4.1
After setting wheel dimensions, press
<START>
or close the safety cover to spin the wheel and start the
measurement run.
!
CAUTION:
wheel start automatically when safety cover is closed, if present.
7.4.2
At the end of the spin the wheel will brake automatically and the display will show the weight position and weight
requirement to correct the wheel’s umbalance.
7.4.3
Apply the weights (fig.58, fig.59). If umbalance shown is 0, press
<FINE>
to show residual umbalance.
Fig. 58
Fig. 59
Summary of Contents for V548.G4.U
Page 1: ...www fasep it User s MANUAL V548 G4 U...
Page 21: ......
