Operator manual
HA180
V. 2.0
19
3.3.2
Place the can
1. Place the can (A) at the centre of the mark (B) on the can
table.
3.3.3
Move up the can table
1. Push and hold the upper part of the can table switch (A).
The
can table (B) moves up and stops when the can is in front of
the can sensor (C)
.
2. After the can table stops, release the can table switch.
3.3.4
Move down the can table
1. Push and hold the lower part of the can table switch (A).
The
can table (B) moves down.
2. When you can remove the can, release the can table switch.
If you hold the can table switch, the can table moves down to
a halt.
A
B
A
B
A
A
B
A
A
B
WARNING
Do not put your foot below the can table.
