INSTALLATION
1.
Remove possible packing and verify that equipment is in the correct
vertical position
2.
E
2 a:
Connect the machine to a 230-240 V and 50 Hz.
The machine has not to be exposed to the rain.
2 b:
3.
W
quipment ignition
~
raise the switch placed on equipment back panel
ait for 3-4 hours before start using the equipment in order to achieve
the correct temperature of liquid working.
The machine must not be placed outside or exposed to rain or liquid
sprinkles.
The machine must be positioned away from heat and in rooms with a
minimal temperature of +10 C° and a maximal temperature of +30° C.
Beware: the machine increases the room temperature during its
functioning.
BE SURE THAT FAST CHILLER IS ALWAYS CONNECTED TO
AN ELECTRIC INSTALLATION EQUIPPED WITH SAFETY
DEVICE AND EARTH CONNECTION.
IT'S IMPORTANT THAT THE MACHINE IS PLACED IN A WAY
THAT AIR LEAKS THROUGH SIDE GRILLE, FREELY.
DO NOT DRAW IT NEAR THE WALL NO LESS THAT 20 CM OF
DISTANCE.
SET UP AND INSTALLATION
3
YES
NO
ON
OFF
ON
OFF
Summary of Contents for FS3X
Page 2: ...Pull out one barrier bags pour the cooling liquid included into the basin sfilare...
Page 14: ...NOTES...
Page 15: ......