Fast Chiller FS3X, User'S Manual Care And Maintenance

1)   

Let liquid inner Fast Chiller cools for 3-4 hours before using it.

2)   

Use the machine following specifications.

3)

   Pay attention to insert and remove bottles from the well: if there is a 

resistance   do not force it, verify that in the cooling well are not blockings.

4)   

Pay attention to the produced pressure inner the fizzy soft drinks bottles as Coca 
Cola  etc,  take  out  the  cap  gradually  and  with  attention,  in  order  to  prevent 
content leakage.

5)   

Do not leave the bottles inner the well after the buzzer ringing: they could ice 
and break , in case of long permanence.

6)  

The cooling valve inner machine must suck air any time. Do not cover Fast     
Chiller and not embed it in a room corner because its sides have to be free 
and removed from any impediments, 20 cm at least.

7)

   Keep cleaned the suction and exhaust grilles. Clean them every now and 

then, using a brush or a vacuum cleaner.

8)   

Do not remove protection panels. Only an authorized expert can do it. Every        

breaking will be without warranty.

9)

Do not use the machine for other aims. This machine has been 
manufactured to be used as fast cooler of bottles liquids in order to obtain  
the requested temperature especially for quality table wines, and it has to be 
used only for this aim.

10)

 How to use it correctly and safety. Machine lifting can be uncomfortable and 

difficult for its weight and shape; pay attention to remove the machine with its 
small wheels (mod TT3 excepted).

11)

 Check liquid's level held into the basin through the transparency of the 

barrier-bags: during the idle state (no bottles inside) the liquid has to exceed 
last evaporator's coil of 1 cm

ATTENTION:

don't forget children must not use it without grown-up control.

IMPORTANT RECOMMENDATIONS

6