Hardware Description
ComTec GmbH
3-5
PRESET_VALUE is loaded into the counter allowing to count PRESET_VALUE counts until
0xFFFFFFFF is reached.
COMMON and individual GATE
A COMMON GATE input is provided as well as individual GATEs.
Usage of the GATEs is individually settable for each counter in the software.
LOAD input
An external LOAD input allows to reset the counters to their individual start (load) value by an
external signal. Usage of the LOAD input is individually selectable for each counter.
The start values are software settable and will typically be either 0x00000000 or "0xFFFFFFF –
PRESET_VALUE".
GO line
The system wide GO-Line may also control the counting action. This can be set individually for
each counter.