Software Description
ComTec GmbH
5-5
5.1.4. Setting
dialogs
The Hardware... item in the Settings menu opens the MPA4 Settings dialog box. It contains
several buttons that open special setting dialogs.
Via the
Sync2 out
- combo box you can specify the signal you want to observe. The Sync Out
can deliver
10 MHz, 78.125 MHz, 100 MHz.
The level can be logical inverted by checking the
invert
checkbox. A List file can be written by checking the corresponding checkbox
Write
Listfile
. The data format can be ASCII or binary depending on the format settings in the data
operations dialog.
By pressing the "
Test, Inspect...
" button a special dialog is opened that allows to inspect
voltages and temperatures of the FPGA and the MPA4 board. Pressing the Read button can
refresh that information.
Fig. 5.6: Settings overview
Fig. 5.7: Inspect MPA4 dialog