Mini DVR Pro
™
Manual, Fast Forward Video, Inc.
13
MAINTENANCE
Cleaning
The Housing should only require dusting with a soft cloth.
Operation and Storage Environment
Precautions
The Mini DVR Pro has been built to meet the demands of a professional environment, however, the
hardware is subject to the same dangers from static as any other electronic device. Use care when
connecting or disconnecting cables.
IMPORTANT:
Take care not to introduce any moisture into the unit. Electronic assemblies are sensitive to static
electricity, due to the electrostatic sensitive devices used within the circuitry. All semiconductors, as well as some
resistors and capacitors, may be damaged or degraded by exposure to static electricity. The video card must
receive adequate ventilation, and be kept as cool as possible. If you experience any problems with the unit please
call Fast Forward Video’s service department.
DO NOT ATTEMPT to repair or modify the unit as this might
cause further damage,
which could void your warranty
. A technician can determine whether your problem is
caused by a faulty component, and whether you need to return it for evaluation and/or repair.
PACKAGE CONTENTS (May vary depending on model)
1
Mini DVR Pro
1
Multi Purpose Cable Assembly
1
9 VDC External Power Supply w/ 3-Pin Power Cable
1
Set (4) AA Batteries
1
USB Type A to Mini B 3’ Cable Assembly
1
Control Software CD
1 Users
Manual
1
Trouble Shooting Guide
PLEASE RETAIN THE ORIGINAL SHIPPING CARTON AND FOAM INSERTS
If you need to return the unit for
service or upgrade it is STRONGLY recommended that you use the original carton and foam, which were
specifically designed to protect it from damage while in transit. IF RETURNED IN A REGULAR CARTON IT WILL
BE REPLACED AT A FEE FOR THE RETURN SHIPMENT.
FCC Information to the user
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not
cause harmful interference, and (2) this device must accept any interference received, including interference that may cause
undesired operation. This equipment has been tested and found to comply with the limits for a class A digital device, pursuant to
part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference when the
equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy
and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio
communications. Operation of this equipment in a residential area is likely to cause harmful interference, in which case, the user
will be required to correct the interference at his own expense. Notice to the end user: This device has been designed for use
with interconnect cables with an installed length of three (3) feet or less. Use of cables of greater length may cause undesired
behavior.
