Mini DVR Pro
™
Manual, Fast Forward Video, Inc.
8
Connector Pinouts
Video, RS-232 I/O; Trigger, Audio In
Headphone / Line Audio Output mini-jack…
The mating connector:
HR25-9P-20PC
.
Standard 2.5mm Stereo connections
1
CV or Y In
Tip Left Output
2
Trig 1
Ring Right Output
3 GND
Shank Ground
4 C
In
5 GND
6
RS-232 - Txd
Power Connector
7
RS-232 - Gnd
The mating connector:
HR10A-7P-4S
.
8
RS-232 - Rxd
1
+7 to +25 Vdc - We use +9V.
9
Trig2
2
+7 to +25 Vdc - We use +9V.
10 Ref
In
3
Ground
11 Microphone
In
4
Ground
12 GND
13
L Line In - Audio
14 GND
USB Pinout is Standard mini-USB.
15
R Line In - Audio
16 Y
Out
17 GND
18 C
Out
19 GND
20 Composite
Out
Compact Flash Installation Procedure
To install the Compact Flash Cards, follow the procedure below:
Be sure to have Power OFF prior to installing or removing Compact Flash parts. Grasp DVR in left hand
with the long metal door on the right side, grip the compact flash door with right hand and slide it toward
you to expose compact flash connector number one, slide door away from you to expose connector
number two. Insert the compact flash card and slide the door to the center (closed) position.
To remove cards, repeat the process above and depress the ejector button located at the extreme front
and rear of the compact flash door access areas.
The Mini DVR Pro uses multi-word DMA mode 2 compact flash only.
