Commonly Used Tools
•
Hammer
•
Jack Stand
•
45° Snap ring pliers (large and small)
•
3
/
4
” Wrench
•
9
/
16
” Wrench
•
1
/
4
” Allen wrench
•
1
/
4
” Pin punch
•
3
/
16
” Pin punch
•
Soft hammer (nylon mallet)
•
Anti-seize compound
•
Lubricant (i.e. WD40 may be
necessary to remove rusted parts)
Helpful Reminders
•
Never hammer directly on an axle; always use a pin punch.
•
Always replace old roll pins and snap rings.
•
Replace accessible bushings whenever the jack is torn down.
www.FastListParts.com
4
888-999-7715
Suggested Assemblies
to Save Repair Time
•
RL T5BOK-F-Super
Super Seal Kit for Foot Control
•
RL T5BOK-H-Super
Super Seal Kit for Hand Control
•
RL-32
Ultra-Poly Steer Wheel Assembly
•
RL-31-A-D-Super
Super Ultra-Poly Load Roller Kit
•
RL-31-D
Ultra-Poly Load Roller
•
RL -31-3-Super
Super Poly Load Roller Kit
PIN PUNCH
SNAP RING PLIERS
