Tool Use
This Air Operated Dual Action Sander is
designed for the purpose of sanding a
variety of coatings from steel, wood,
plastics, etc.
FT1010
Instruction Manual
Fast Mover Tools
T: 01582 661993 F: 01582 667100 E: sales@fastmovertoolsuk.com
www.fastmovertoolsuk.com
IMPORTANT
Please read through this Manual carefully before using the FT1010.
This tool must only be used for sanding and within the parameters
outlined in this manual. All users of the equipment should be trained in
any risks associated with the products they are sanding or using as
finishing aids.
Specification
Pad Diameter
6”/150mm
Orbit
3 or 5mm
Pad Thread Size
5/16”
Free Speed
10,000RPM
Minimum Pad Speed
12,000RPM
Operating Pressure
90Psi/6.3BAR
Air Consumption
12CFM
Air Inlet
1/4” BSP
Vibration Level (a
hd
)
9.59*m/s
2
Noise Level
86dB(A)
Weight
948g
Length
225mm
Safety Instructions
These instructions are intended as a guide to the correct use of this equipment. The process or
materials being sanded may have risk characteristics requiring additional safety measures and
these must be identified by the user. All users of this sander must be thoroughly acquainted with
this manual.
Before Use and Before Using Tool for the First Time
- Make sure you have the relevant Personal Protection Equipment (PPE).
Hand Protection
The pad revolves at high speed and may cause damage if bought into contact with
exposed flesh. The workpiece and the pad may also get hot after prolonged use. Hand
protection must be strong enough to protect the skin and be a good fit and have no loose
parts that may get caught in rotating parts.
Determination of the test results includes consideration of measurement
uncertainty from the test equipment and methods.
*Uncertainty K: 1.44m/s
2
This model features central
vacuum dust extraction
