FT1048
Instruction Manual
Fast Mover Tools
T: 01582 661993 F: 01582 667100 E: sales@fastmovertoolsuk.com
www.fastmovertoolsuk.com
IMPORTANT
Please read through this Manual carefully before using the FT1048.
This tool must only be used for sanding and within the parameters
outlined in this manual. All users of the equipment should be trained in
any risks associated with the products they are sanding or using as
finishing aids.
Specification
Pad Diameter
4”/100mm
Tool Thread Size
M6 Female
Free Speed
3,500RPM
Operating Pressure
90Psi/6.3BAR
Air Consumption
300L/min
Air Inlet
1/4” BSP
Vibration Level (under load)
1.25m/s
2
(uncertainty 0.62m/s
2
)
Acoustic Pressure
83.5dB(A)
Acoustic Power
94.5dB(A)
Weight
1214g (no pad and with extra handle fitted)
Length
138mm
Safety Instructions
These instructions are intended as a guide to the correct use of this equipment. The process or
materials being sanded may have risk characteristics requiring additional safety measures and
these must be identified by the user. All users of this conditioning tool must be thoroughly
acquainted with this manual.
Before Use and Before Using Tool for the First Time
- Make sure you have the relevant Personal Protection Equipment (PPE).
Hand Protection
The pad revolves at high speed and may cause damage if bought into contact with
exposed flesh. The workpiece and the pad may also get hot after prolonged use. Hand
protection must be strong enough to protect the skin and be a good fit and have no loose
parts that may get caught in rotating parts.
Determination of the test results includes consideration of measurement
uncertainty from the test equipment and methods.
Kit Contents
1 x Air Polisher (See Specification Below) Code FT1047
1 x Removable Right Angle Handle for Air Tool
3 x 100mm Wire Brush Wheels
1 x Adaptor for Wire Brush Wheels
3 x Pair of Surface Conditioning Discs
1 x Adaptor for Surface Condictioning Discs
3 x High Efficiency Rubber Ereaser Wheels
1 x Adaptor for Ereaser Wheel
1 x Spanner
1 x Allen Key
