background image

PLEASE KEEP THIS MANUAL SAFE FOR FUTURE REFERENCE

Fast Mover Tools Limited

T: 01582 661993 F: 01582 667100 E: sales@fastmovertoolsuk.com

www.fastmovertoolsuk.com

 

Warranty

We hope that you will be very happy with your purchase.  If you do have a problem with your tool,
you have the added peace of mind of a 6 month warranty, which comes into date from the date of
purchase (proof of purchase required).

Scope of Warranty

- The warranty will cover you from all faults caused by defective components or poor workmanship.
- Tools sent outside the EU are not covered by this warranty.
- Product must be returned to us, the warranty does not cover cost of carriage.
- If the product is no longer in manufacture, it will be replaced with a tool of equivalent or higher 

specification.

What is not covered

- Normal wear and tear caused by use in accordance with the operating instructions.
- Replacement of any provided accessories, such as Backing Pads, Airline Connections, Air 

Fittings, Blades, Spanners, etc.

- Accidental damage, faults caused by negligent use or care, neglect, misuse or careless operation, 

handling and storage of the product.

- Modification of, or change of, any part of this product in any way.
- Faults caused by use of non compatible accessories.
- Tool seizure caused by insufficient oiling.
- Faults caused by incorrect installation.
- Repairs or alterations carried out by non-approved parties.
- Traces of water or rust inside tool - this shows that a properly working air filter has not been used.

Validity

- This warranty is valid for 6 months after date of purchase.
- Warranty is rendered invalid if;

- Tool is taken apart for any reason without our consent.
- Tool is not oiled daily.
- Air supply line is not used with a properly working air filter.

- A warranty claim will not be accepted without an official proof of purchase from your supplier.

Warranty Verification

Please keep this manual with your tool for the purpose of verifying your

warranty.  Fill in box below to validate warranty.

Fax to 01582 667100

Tool Code:

FT1068

Place of Purchase
____________________________________________
____________________________________________
_____________  Post Code __________________
Date
___________________________________________

Your Details
Company ________________________
Address  ________________________
________________________________
Post Code________
Email

________________________

FT1068_Product Instructions  21/07/2014  14:39  Page 7

Summary of Contents for FT1068









Reviews:

Related manuals for FT1068