60
5.
Replace the hand gun to the storage bracket and
replace the lid on the chemical inductor tank.
9.21.2 Optional Electric System
• The optional electric system has a 12 volt pump located
under the 50 gallon rinse water tank.
• There is an electric ON/OFF switch located at the top of
the control center.
• The water is supplied from the 50 gallon rinse water
tank.
To Operate:
1. There must be water in the 50 gallon rinse water tank.
2. Turn ON the electric switch located at the top of the
control center.
3. Remove the hand gun from the storage bracket and
rinse the chemical inductor tank.
4.
When finished turn OFF the electric switch, point the
hand gun into the chemical inductor tank and squeeze
the trigger to drain the pressure from the hand gun and
hose.
5.
Replace the hand gun to the storage bracket and
replace the lid on the chemical inductor tank.
NOTE: There is a filter assembly located on the electric 12
volt pump. This filter should be serviced at least once per
season. Rinse tank must be empty to remove filter.
1 - Hand Rinse Gun
1 - Hand Rinse Gun
2 - Chemical Inductor Tank
3 - Storage Bracket
9.22 Personal Fresh Water Tank
For your safety all Fast Manufacturing, Inc. sprayers have a
personal 5 gallon fresh water tank as standard equipment.
The fresh water tank is an integral part of the product tank.
This tank is a source for clean, chemical free water for
washing hands or other personal use. Use a water hose
to fill the tank with clean water from an uncontaminated
source.
1 - Personal Fresh Water Tank
2 - Personal Fresh Water Tank Fill
3 - Personal Fresh Water Tank Petcock
Summary of Contents for BW750
