PREPARING MACHINE
PAGE 19
6. Attach hose to section valves.
•Loosen the clamp.
•Slide the hose onto the section valve
fitting. Use one hand to support the
fitting as shown.
•Tighten clamp.
7. Attach the sprayer to the tractor.
8. Connect the PTO pump.
See “ATTACH SPRAYER TO TRACTOR”
If the hoses are too long:
•Disconnect PTO pump from tractor.
•Disconnect hoses from PTO pump.
•Cut hoses to size needed to fit tractor.
•Reconnect hoses to PTO pump.
Spray Wand
The spray wand is zip tied to the spray
wand holder for shipping.
Carefully cut the ties to release.
NOTE: The electrical harness for the
tail light is also zip tied to the spray
wand holder. Only cut the ties holding
the spray wand hose.
Hydraulic Motor Driven Chemical Pump
Install and tighten the drain plug at the bot-
tom of the pump.
Set hydraulic outlet flow to 2.8-4.8 GPM
for optional pump output
Performance Chart
Summary of Contents for UT3P
