OPERATION
PAGE 30
Field Operation
1. Read and understand the Operator’s
Manual and all safety signs on the
equipment.
2. Follow the Pre-Operation Check List.
3. Spray only when potential for chemical
drift is at a minimum.
4. Be aware of obstacles and hazards in
the field to be sprayed.
5. Do not allow riders on sprayer or trac-
tor.
6. Clear the area of bystanders.
7. Calibrate the sprayer, or verify calibra-
tion is correct for the job.
8. Calculate the amount of water and
chemical needed for the field(s).
9. Attach the sprayer to the tractor.
10. Review location and function of all con-
trols.
11. Put on PPE. Fill the tank with the exact
amount of chemical solution needed.
12. Stop tractor, set parking brake, remove
key and wait for all moving parts to
stop before leaving tractor seat.
13. Unfold boom wings.
14. Open tank valve and adjust agitation
valve to position determined when
application rate was calibrated.
15. Proceed into the field at a constant
speed. Use the same gear, engine
RPM, and ground speed determined
when application rate was calibrated.
16. Operate the controls to turn on boom
sections. Monitor and adjust pressure.
17. When spraying job is complete turn off
section control switches and close tank
valve.
18. Follow the procedure to rinse the
tank.
See “TANK MAINTENANCE AND
SERVICE”
19. When rinse is complete, stop tractor,
set parking brake, remove key and wait
for all moving parts to stop before leav-
ing tractor seat.
20. Close tank valve.
21. Fold wings into transport position.
22. Transport sprayer to storage location.
23. Disconnect sprayer from tractor.
Summary of Contents for UT3P
