MAINTENANCE AND SERVICE
PAGE 60
PUMP MAINTENANCE AND
SERVICE
Filter Cleaning
The filter location varies by operating sys-
tem. There may be more than one filter.
Follow the procedure below for each filter.
At the start of each day before the water
and chemicals have been added, the
screens should be checked and cleaned.
Filter
1. Close the tank valve and agitation
valve.
2. Place a pail under filter. Remove the
drain plug and allow liquid to drain.
IMPORTANT: Loosen and tighten the fil-
ter bodies by hand. Do not use a
wrench as this could damage the filter
body.
3. Turn the filter body to remove.
4. Remove screens and inspect for dirt or
damage.
5. Clean screens using clean water.
6. Inspect screen for holes or tears. If
screen is damaged replace it.
Summary of Contents for UT3P
