MAINTENANCE AND SERVICE
PAGE 67
Tail Light Replacement
Disconnect main wiring harness from trac-
tor.
Disconnect the tail
light wiring harness
(1).
To replace bulb:
• Twist socket (2)
to remove light.
•Replace bulb.
•Insert socket into
light assembly.
and twist to lock.
•Connect tail light
wiring harness
(1).
To replace broke light:
•Remove broken light socket (2).
•Remove light assembly bolts (3).
•Replace light assembly.
•Install bolts (3).
•Install light socket (2).
•Connect tail light wiring harness (1).
HYDRAULIC SYSTEM
MAINTENANCE AND SERVICE
1
3
2
The hydraulic system operates
under extremely high pressure.
Escaping fluid under pressure can
penetrate the skin causing serious
injury.
If an accident occurs, seek medical
assistance immediately. DO NOT
DELAY. Any fluid injected into the
skin must be surgically removed.
Serious infection or toxic reaction
can develop from hydraulic fluid
piercing skin surface.
Tighten all connections before
applying pressure.
Replace worn, cut, abraded, flat-
tened or crimped hoses.
Do not attempt makeshift repairs to
hydraulic lines, fittings or hoses by
using tape, clamps or cements.
Check for leaks with a piece of
cardboard, Do Not use your hands
to check for leaks. Protect hands
and body from high pressure fluids.
Summary of Contents for UT3P
