LUBRICATION & MAINTENANCE
LUBRICATION & MAINTENANCE Utility Sprayer 25' / 30' / 40' / 45'
Page 82
Properly dispose of all old containers and
any residual lubricant they may contain.
Grease
Use an SAE multi-purpose high-temperature
grease
with
extreme-pressure
(EP)
performance. An SAE multi-purpose lithium
base grease is also acceptable.
Use a handheld grease gun.
Clean fittings before greasing.
If a fitting will not take grease, remove and
clean it thoroughly. Clean and lubricate the
passageway. Replace the fitting if necessary.
Greases for Air Temperature Ranges
Use grease based on NLGI consistency
numbers and the expected air temperature
range during the service interval.
IMPORTANT: Some types of grease
thickeners are not compatible with
others. Consult your grease supplier
before mixing different types of
grease.
Alternative and Synthetic Lubricants
Conditions in certain geographical areas
may require lubricant recommendations
different from those printed in this Manual.
Synthetic lubricants may be used if they meet
the performance requirements as shown in
this Manual.
The temperature limits and service intervals
shown in this Manual apply to both
conventional and synthetic lubricants.
Re-refined base stock products may be used
if the finished lubricant meets the
performance requirements.
Frame Lubrication
•
Grease the wing pivots.
•
Grease the Breakaway Clutch.
Summary of Contents for UT3P25
