ELITE XT - HOW TO INCREASE CLAMPING FORCE
INSTRUCTIONS
2)
from oil or lubricants.
Remove clamp from guides if necessary.
Clamp works optimally with VERY little amount
of oil. Use solvent for cleaning if necessary.
CLEAN GUIDE RODS
3)
from oil
and lubricants. Clamp works the best with none or VERY little
amount of oil. Use solvent if necessary.
CLEAN BOTH LOCKING UNITS (inside the clamp)
4) ATTACH SUPPORT ROD and fasten screws.
Area to be cleaned is
shown here: precision
hole.
1) REMOVE SUPPORT rod. Open to screws with hexagonal key.
(Inside the clamp)
Locking unit
Page 1 of 3
www.maping.com
PREP
ARA
TIONS
CLEANING
CLEANING
RE-ASSEMBL
Y
RE-ASSEMBL
Y
